Product Range: AP
- Ancillary Products
DOL MOTOR STARTERS
Standard direct on line starters with conventional thermal overloads. The DOL starters are suitable for single or three phase fans with full load currents of up to 26 amps. Both types have plastic enclosures with start and stop push buttons, with the overload of your choice pre-fitted and set.

• Dimensions: 190mm H x 94mm W x 114mm D
• Weight: 0.69kg
• Enclosure: IP 54
• Max FLC: 26 amp
 

RS1
REVERSING SWITCH
The RS1 is a 15 amp fan reversing switch housed in a compact and durable IP65 enclosure. The selector switch has forward, reverse and off positions and is suitable for single or three phase supply.

• Dimensions: 190mm H x 94mm W x 114mm D
• Weight: 0.69kg
• Enclosure: IP 54

 

RT5A RUN-ON TIMER
The RT5A is a multi-range run-on timer with time delay adjustment from 5 seconds to 4 hours. Time ranges are set by means of the internal DIL switches and delay time can be set with a small screwdriver by adjusting the small min max pre-set RV1. The timer provides a switched live (240v) output from a 5 amp relay. The timing period is started when the live (trigger) is applied and removed from the ‘t’ input. Supplied in white ABS surface mounting enclosures.

• Dimensions: 85mm H x 85mm W x 40mm D
• Supply: 220/250V AC 50 Hz
• Max FLC: 5 amp
 
Timeclock
7-Day or 24 hour timelock, for use with Electric Heater Battery Controllers and also Changeover Panels, Panel, Chassie or Din Rail Mounting.
 
Duct Thermostat
To be used in conjunction with the TC range of Electric Heater Battery Controllers.
 
Duct Sensor
To be used in conjunction with the ESC range of Electric Heater Battery Controllers.
 
Airflow Switch
To be used in conjunction with the ESC range of Electric Heater Battery Controllers.
 
Filter Pressure Switch
For monitoring pressure differential between 2 sides of a filter to sense a dirty filter. Can be used for airflow proving.
 
Room Thermostat
To be used in conjunction with the TC range of Electric Heater Battery Controllers.
 
   
Price List Button